At Adya we believe Smart Grid is the game-changing technology which improves the bottom line of any entity along with environmental benefits to communities. As part of that vision, we designed and produce Adya’s intelligent smart meter which is a fully AMI compatible energy meter.
We provide the following categories of energy meters.
Sixty percent of the utility services & connections are equipped with the Single Phase Energy Meter, which consists of low-end consumers and which is used primarily for Billing, load control, and load profiling. Keeping this in view, Adya has introduced a cost-effective solution, to meet the growing demands of Smart Metering.
They support the multiple-tariff, Connect/Disconnect, TOU, HAN, Maximum Demand, Outage Management, import/export functionalities. The meter supports both AMI and AMR functionalities.
Features and benefits
IEC 62052-21 DLMS/COSEM RS-232, RS-485, Optical Port Sub-Meters for Residential Apartments, Industries, and commercial complexes Load Control using HAN or using TOU Energy audit Accuracy Class 1.0 Push Technology: Send data every 15 minutes or as desired by client Memory logging consumption, Load profiling, Communication failures for 6-9 months TOU Tariff and maximum demand registration Twenty plus anti-theft alerts Power factor recording for reactive power management Meter immune to Tampers and liver alerts Multi-Meter support for Water, Gas and other instruments Easy integration with HDU and HAN
|
Variants
This is the basic model and is very cost effective. This model can be upgraded to high-end smart metering with the help of communication of suitable firmware. This is suitable for AMR or AMI metering.
Communication: hand-held devices, IRD
This Smart Meter is equipped with Connect/Disconnect, Anti-theft, Multiple Tariff and supports all the Smart Metering applications like Demand Response, Demand Side Management, Peak Load Management, HAN, and HDU.
Used: Utilities and Sub-Metering in Industries, Townships and Commercial complexes
Communication: Mesh ZigBee and Low Power RF
It has all the features of the 39110 and fitted with Cellular Modem.
Used: Utilities and Sub-Metering in Industries, Townships and Commercial complexes
Communication: Mesh ZigBee /Low Power RF
This meter is equipped with inbuilt modem consisting of RF and Cellular. RF is used to form Mesh Network with HAN and GPRS to directly connect to the Utility command center By coupling the RF and Cellular on the same modem we can avoid the cost of an additional DCU to establish the WAN connectivity. At the residence or industries which are stand-alone places where you want to do the localized demand side management, this solution will be on unique advantage
Use: Industries, Stand-alone premises for Billing and Demand Side management
|
Adya offers AEM39110 for the Three Phase Meter direct-connect meter with high accuracy.The Energy Meter caters to various applications and supports the road-map of the utility industry. The E120LiME is an electronic integrated class B electricity meter. The system has been designed for wide range of applications from LT-CT consumers.It is versatile, reliable and easily installed and configured.
Features and benefits
62052-11 IEC 62053-21m, DLMS complaint, IS 13779 RSR 232, RS 485, Optical Port Sub-Meters for Industrial, Residential and Commercial sectors Direct Connect for Industrial, Residential and Commercial sector Accuracy Class 1.0 Push Technology: Send data every 15 minutes or as desired by client Four-quadrant measurement Memory logging consumption, Load profiling, Communication failures etc TOU Tariff and maximum demand registration Self-Diagnosis Power factor recording for reactive power management Programmable to do the Demand Management Multi Meter support for Water, Gas and other devices Easy integration with HAN and HDU
|
Variants
This is the basic model which is very cost effective four-quadrant metering model which caters to the low-consumption consumers. This model can be upgraded to high-end smart metering with the help of communication of suitable firmware. This is suitable for AMR or AMI metering. Communication: hand-held devices, IRD
This is the Smart Meter with Connect/Disconnect, Anti-theft, Multiple Tariff and supports all the Smart Metering applications like Demand Response, Demand Side Management, Peak Load Management, HAN, HDU. The meters are equipped with communication slot supporting RF Mesh Networking.
Used: Utilities and Sub-Metering in Industries, Townships and Commercial complexes
Communication: ZigBee, Low Power RF
It has all the features of the 39110 but fitted with Cellular Modem.
Used: Industries, Any stand-alone units where it is not possible to make a mesh.
At the industries where you want to do the localized demand side management, this solution will be on the unique advantage. By coupling the RF and Cellular on the same modem we can avoid the cost of an additional DCU to establish the WAN connectivity. RF is used to form a Mesh Network and GPRS to directly connect to the Utility command center.
Use: Industries, Stand-alone premises for Billing and Demand Side management
|
Adya employs metering experts with 15 years of design experience; who have designed high quality, robust CT meters which cater to current day needs and matches the vision of the utility. The CT operated meters encompasses a wide range of Power levels and Time of Use tariff with various alerts. They offer choice of communication capability for both AMR and AMI.
The meters are available in wide range of accuracy classes complying to the international standards, various wiring and communication configurations. They are available in the accuracy classes of 0.5. The usage of these meters varies from industrial, consumer to Transformer metering. The capture various parameters like Event and consumption logging, TOD metering, consumption data and other vital parameters which enable the load profiling and audit. The data is gathered both on the periodic and on-demand basis. They are designed to meet the high accuracy standards which are used for the Billing and Audit purposes.
CT operated meters are available for LT(LV) consumers
IEC 62052-21, DLMS/COSEM Distribution Transformers Industries and commercial complexes RS-232, RS-485, Optical Port Accuracy Class 0.5 Push Technology: Send data every 15 minutes or as desired by client Audit: It enables audit to be done at each Phase Level of RYB Four-quadrant measurement Memory logging consumption, Load profiling, Communication failures for 6-9 months TOU Tariff and maximum demand registration Power factor recording for reactive power management Optical port/RS-232/Rs-485 Communication: Mesh: LPR, Zigbee, Cellular DLMS compliant
|