Adya’s SmartHub (SH1000) data concentrator is built on Hybrid Communication and forms a very critical component in the Smart Metering solution. SmartHub handles the WAN, LAN and HAN connectivity to meters. It’s an IP device and it gives the Utility the option of choosing the communications channel. The device helps in routing the data from the Energy Meter to the utility command center.
Using the features of Self-healing and discovery, the hub enables connecting Energy Meters with one another. It has the ability to handle a large number of meters on the mesh network and bridges the communication between the Mesh network and the MDM. The communication can handle both wired and non-wired technologies. The multiple outputs of the SmartHub enable connecting various outputs. This can be used for both the AMR and AMI infrastructure.
The SmartHub enables various uses such as managing the Billing, Demand Management, Outage Management, Network Analysis etc
DLMS compliant Processor based DCU Built on Linux environment Handle heterogeneous meters Supports Multiple Applications for water, gas, citizen services etc Multiple Outputs like RSR232, USB, RS485, MODBUS, RJ45 Logging off: Meter data, outages, various other parameters Easily deployable SmartHub supports various communication channels
One of the major challenges has been the reliability, scalability and the cost-effectiveness of the communication networks to the demands of the Smart Metering rollouts.
SHP800, RTU, ingeniously designed by ADYA addresses the core issues relating to communication. The RTU is RF based modem and which is connected to energy meter. Each RTU acts as transmitting device and connects to the neighboring Energy Meter fitted with RTU and forms a Mesh Network. The mesh can be in a group of 50 to 5000 meters based on the topology and the frequency of the parameters to be gathered. It transmits the data seamlessly and without any data loss to the SmartHub.
The RTU transforms and Energy Meter into Smart Energy Meter by its ability for Bi-directional data flow. This is the bridge between the Energy Meter and the Data Concentrator Unit (DCU). The RTU helps in capturing the data for Billing, Outage Management, Power Quality Factor, Instantaneous Parameters, Theft, Alerts.
RTU can also be plugged onto old meters to provide the retrofit solution.
Robust, scalable and secure architecture Enables Remote Connect, Disconnect Billing Data every 15/30/60 minutes Real-time power outages and communication failures Data Integrity of 99.5% Field Replaceable Nodes (FRN) Battery enables the outages management
Adya has designed the Load Control modules/HAN modules to cater to Demand Response and Demand Side management. These modules enable industries and residential consumers to do their own energy efficiency programs
Adya’s HAN/Load Control are seamlessly integrated with the Smart Meter and enable the DR programs to be displayed on to the Home Display Unit